LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm SHAP-050 — Width must be > 0

FANUC SHAP-050 (“Width must be > 0”): The width must be > 0. First check: Set the value higher than 0.

Updated 2026-09-17 · LogrobotLM reference

Description

The width must be > 0. The value for width is 0 and a shape can not be generated with this setting.

Remedy

Set the value higher than 0.

Related codes

SHAP-048Diameter must be > KWSHAP-049Length must be > 0SHAP-051Width must be > KWSHAP-052NumPts must be multiple of 2

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →