LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm SPOT-006 — PAUSE Weld enable mismatch %s

FANUC SPOT-006 (“PAUSE Weld enable mismatch %s”): The weld enable status from the weld controller does not match the robot's weld enable status. First check: Check the robot's weld enable status on the TEST CYCLE menu and compare it to the weld controller's weld enable status.

Updated 2026-08-29 · LogrobotLM reference

Description

The weld enable status from the weld controller does not match the robot's weld enable status.

Remedy · Remède

Check the robot's weld enable status on the TEST CYCLE menu and compare it to the weld controller's weld enable status. These must be the same.

Frequently asked · Questions fréquentes

What does FANUC alarm SPOT-006 mean?
FANUC SPOT-006 (“PAUSE Weld enable mismatch %s”): The weld enable status from the weld controller does not match the robot's weld enable status.
How do you troubleshoot FANUC alarm SPOT-006?
Check the robot's weld enable status on the TEST CYCLE menu and compare it to the weld controller's weld enable status. These must be the same.

Related codes / Codes liés

SPOT-004PAUSE Water flow OK fault %sSPOT-005PAUSE X-former OK fault %sSPOT-007PAUSE Weld in process timeout %sSPOT-008PAUSE Weld complete timeout %s

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →