LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm SPOT-058 — PAUSE Studwelder - Air Pressure Low

FANUC SPOT-058 (“PAUSE Studwelder - Air Pressure Low”): Studwelded - Air Pressure Low The studwelding controller detect that the air pressure has fallen below the minimum operating level of 85 psi. First check: Increase system air pressure.

Updated 2026-09-17 · LogrobotLM reference

Description

Studwelded - Air Pressure Low The studwelding controller detect that the air pressure has fallen below the minimum operating level of 85 psi.

Remedy

Increase system air pressure.

Related codes

SPOT-056PAUSE Weld Head Not Retracted-Gun1SPOT-057PAUSE Weld Head Not Retracted-Gun2SPOT-059PAUSE Stud Controller Fault2SPOT-060Robot Not At Home Position

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →