LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm SPOT-085 — PAUSE GUN CLOSE timed out-gun 1

FANUC SPOT-085 (“PAUSE GUN CLOSE timed out-gun 1”): The robot timed out waiting for the gun to close. First check: Check the Equipment I/O menu, as well as all wiring.

Updated 2026-09-17 · LogrobotLM reference

Description

The robot timed out waiting for the gun to close.

Remedy

Check the Equipment I/O menu, as well as all wiring. If the input is going high, try increasing the timeout by setting $spoteqsetup[].$gun_cl_to to a bigger number. The default is 2000 ms, or 2 seconds.

Related codes

SPOT-083PAUSE Undefined pressure (P=*)-gun 1SPOT-084PAUSE BACKUP CLOSE timed out-gun 1SPOT-086PAUSE BACKUP OPEN timed out-gun 1SPOT-087PAUSE GUN OPEN timed out-gun 1

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →