FANUC Alarm SPOT-307 — Gun Tip Test missing model
FANUC SPOT-307 (“Gun Tip Test missing model”): The Gun Tip base or tip model was not found by vision. First check: 1. Verify that the enclosure LED is operational 2.
Updated 2026-09-17 · LogrobotLM reference
Description
The Gun Tip base or tip model was not found by vision.
Remedy
1. Verify that the enclosure LED is operational 2. Verify that the correct caps are on the weld gun 3. Adjust the Vision Process as necessary
Related codes
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →