FANUC Alarm SPOT-308 — Robot Tip Test missing model
FANUC SPOT-308 (“Robot Tip Test missing model”): The Robot Tip base or tip model was not found by vision. First check: 1. Verify that the enclosure LED is operational 2.
Updated 2026-08-29 · LogrobotLM reference
Description
The Robot Tip base or tip model was not found by vision.
Remedy · Remède
1. Verify that the enclosure LED is operational 2. Verify that the correct caps are on the weld gun 3. Adjust the Vision Process as necessary
Frequently asked · Questions fréquentes
- What does FANUC alarm SPOT-308 mean?
- FANUC SPOT-308 (“Robot Tip Test missing model”): The Robot Tip base or tip model was not found by vision.
- How do you troubleshoot FANUC alarm SPOT-308?
- 1. Verify that the enclosure LED is operational 2. Verify that the correct caps are on the weld gun 3. Adjust the Vision Process as necessary
Related codes / Codes liés
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →