LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm SPOT-385 — PAUSE IWC(DG) illegal counter specified

Manufacturer wording — PAUSE IWC(DG) illegal counter specified(%s)
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC SPOT-385 (“PAUSE IWC(DG) illegal counter specified”): This operation requires the PC Interface option be loaded on the controller. First check: Install the PC Interface software option on the controller.

Updated 2026-09-17 · LogrobotLM reference

Description

This operation requires the PC Interface option be loaded on the controller.

Remedy

Install the PC Interface software option on the controller. Refer to the FANUC Robotics Software Installation Manual for more information.

Related codes

SPOT-382PAUSE IWC(DG) illegal stepper numberSPOT-384IWC(DG) leak inputSPOT-386PAUSE Reset stepper timeout …SPOT-397Studwelding resume not allowed

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →