LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm SRVO-108 — SERVO Press RESET to enable robot

FANUC SRVO-108 (“SERVO Press RESET to enable robot”): When the Enable/Disable switch is changed to enable, a reset is necessary for execution. First check: Press the RESET key to enable the robot.

Updated 2026-09-17 · LogrobotLM reference

Description

When the Enable/Disable switch is changed to enable, a reset is necessary for execution.

Remedy

Press the RESET key to enable the robot.

Related codes

SRVO-106SERVO Door open/E.Stop(Robot:…)SRVO-107SERVO Ext brake abnormal(Rbt:…)SRVO-111SERVO Softfloat time outSRVO-112PAUSE Softfloat time out

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →