LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm SYST-044 — SYSTEM (Abnormal) TP disabled in T1/T2 mode

FANUC SYST-044 (“SYSTEM (Abnormal) TP disabled in T1/T2 mode”): The mode selector is in T1 or T2 and the TP ON/OFF switch is in the OFF position and SVON is ON. First check: Call your FANUC Robotics technical representative.

Updated 2026-09-17 · LogrobotLM reference

Description

The mode selector is in T1 or T2 and the TP ON/OFF switch is in the OFF position and SVON is ON. This is an abnormal condition.

Remedy

Call your FANUC Robotics technical representative.

Related codes

SYST-042PAUSE DEADMAN defeatedSYST-043PAUSE TP disabled in T1/T2 modeSYST-045PAUSE TP enabled in AUTO modeSYST-046SYSTEM Control Reliable/CE Mark config mismatch

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →