LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm SYST-045 — PAUSE TP enabled in AUTO mode

FANUC SYST-045 (“PAUSE TP enabled in AUTO mode”): The mode selector is in AUTO and the TP ON/OFF switch is in the ON position First check: Turn the TP ON/OFF switch to OFF.

Updated 2026-09-17 · LogrobotLM reference

Description

The mode selector is in AUTO and the TP ON/OFF switch is in the ON position

Remedy

Turn the TP ON/OFF switch to OFF. Press RESET.

Related codes

SYST-043PAUSE TP disabled in T1/T2 modeSYST-044SYSTEM (Abnormal) TP disabled in T1/T2 modeSYST-046SYSTEM Control Reliable/CE Mark config mismatchSYST-047WARN Continuing from distant position

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →