LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm VISN-038 — WARN Invalid camera number

FANUC VISN-038 (“WARN Invalid camera number”): The built-in routine INIT_CS was called with a camera number which is out of range. First check: make sure that the camera number is within the range 1 to 32.

Updated 2026-09-17 · LogrobotLM reference

Description

The built-in routine INIT_CS was called with a camera number which is out of range.

Remedy

make sure that the camera number is within the range 1 to 32.

Related codes

VISN-036WARN Vis_Process not an AcquireVISN-037WARN Vis_Proc. not Feature Find …VISN-039WARN Invalid calibration method …VISN-040WARN Cam_setup changed to NOT TRAINED

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →