KUKA Error 1363 — CONSOLE LOCKED
Displayed as KSS01363 on KRC4 / KRC5 controllers
KUKA 1363 (“CONSOLE LOCKED”): The command cannot be executed because the KCP settings do not meet the conditions. First check: Fulfill the active conditions. Likely part: KCP (KCP teach pendant (KUKA Control Panel)).
Updated 2026-09-09 · LogrobotLM reference
Cause
The command cannot be executed because the KCP settings do not meet the conditions. For RST and fixed KCP, mode "AUT" is required. For a non-fixed KCP, modes "T1" or "T2" are required. For a host computer, mode "EXT" is required.
Effect
The command is not executed.
Troubleshooting
Fulfill the active conditions.
Part to check / replace
KUKA 1363 points to the hardware below — start here before ordering.
Tap a part for every code that points to it — and verify the exact variant for your controller before ordering.
Related codes
Same hardware involved
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →