ABB Error 0741 — Axis computer fault
ErrorABB 0741 (“Axis computer fault”): The cabinet axis computer does not respond to the drive self-tests. Likely part: Axis computer (Axis computer).
Updated 2026-10-22 · LogrobotLM reference
What it means
The cabinet axis computer does not respond to the drive self-tests.
What to check
- Replace the axis control computer board (robot computer).
- Note: Equivalent to the drive axis board not responding (32575) on IRC5.
Part to check / replace
ABB 0741 points to the hardware below — start here before ordering.
Tap a part for every code that points to it — and verify the exact variant for your controller before ordering.
Related codes
Same hardware involved
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →