ABB Error 32569 — Axis computer fault
ErrorABB 32569 (“Axis computer fault”): The flash memory content of the drive axis computer is corrupted. Likely part: Axis computer +2 more.
Updated 2026-10-22 · LogrobotLM reference
What it means
The flash memory content of the drive axis computer is corrupted.
What to check
- Restart the cabinet using the main switch.
- Replace the axis computer board.
- Note: Similar to the older-generation S4 and S2/S3 PROM errors.
Part to check / replace
ABB 32569 points to the hardware below — start here before ordering.
Tap a part for every code that points to it — and verify the exact variant for your controller before ordering.
Related codes
Same hardware involved
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →