ABB Error 0751 — Axis computer fault
ErrorABB 0751 (“Axis computer fault”): The cabinet axis computer does not respond to the drive offset compensation commands. Likely part: Axis computer (Axis computer).
Updated 2026-10-22 · LogrobotLM reference
What it means
The cabinet axis computer does not respond to the drive offset compensation commands.
What to check
- Replace the axis control computer board (robot computer).
- Note: Will become axis servo faults.
Part to check / replace
ABB 0751 points to the hardware below — start here before ordering.
Tap a part for every code that points to it — and verify the exact variant for your controller before ordering.
Related codes
Same hardware involved
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →