LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

ABB Error 32563 — Axis computer fault

Error

ABB 32563 (“Axis computer fault”): Incompatible axis computer hardware or RobotWare version too old to support it. Likely part: Axis computer (Axis computer) +2 more.

Updated 2026-10-22 · LogrobotLM reference

What it means

Incompatible axis computer hardware or RobotWare version too old to support it.

What to check

  • Replace the axis computer with a compatible revision.
  • Upgrade RobotWare.
  • Note: Modern cabinet hardware/software incompatibility.

Part to check / replace

ABB 32563 points to the hardware below — start here before ordering.

Tap a part for every code that points to it — and verify the exact variant for your controller before ordering.

Related codes

31108Serial link RS232 fault31114CPU main fault31115Link console fault

Same hardware involved

32569DSQC101832575DSQC101832577DSQC101832576DSQC 668

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →