LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

ABB Error 32577 — Axis computer fault

Error

ABB 32577 (“Axis computer fault”): Corrupted physical configuration information stored in the axis computer. Likely part: Axis computer +2 more.

Updated 2026-10-22 · LogrobotLM reference

What it means

Corrupted physical configuration information stored in the axis computer.

What to check

  • Restart using the cabinet main disconnect switch.
  • Replace the failed axis computer.
  • Note: Integrity fault of the axis flash memory chip, similar to 32574.

Part to check / replace

ABB 32577 points to the hardware below — start here before ordering.

Tap a part for every code that points to it — and verify the exact variant for your controller before ordering.

Related codes

31108Serial link RS232 fault31114CPU main fault31115Link console fault

Same hardware involved

32563DSQC101832569DSQC101832575DSQC101832576DSQC 668

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →