LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

ABB Error 32575 — Axis computer fault

Error

ABB 32575 (“Axis computer fault”): The control system did not detect the presence of an axis computer board. Likely part: Axis computer +2 more.

Updated 2026-10-22 · LogrobotLM reference

What it means

The control system did not detect the presence of an axis computer board.

What to check

  • Check the physical insertion of the board.
  • Check the conformity of the internal Ethernet cables.
  • Note: Similar to axis start-up subcode 0358 on S2/S3.

Part to check / replace

ABB 32575 points to the hardware below — start here before ordering.

Tap a part for every code that points to it — and verify the exact variant for your controller before ordering.

Related codes

31108Serial link RS232 fault31114CPU main fault31115Link console fault

Same hardware involved

32563DSQC101832569DSQC101832577DSQC101832576DSQC 668

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →