LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm APSH-014 — WARN RESET Failure

FANUC APSH-014 (“WARN RESET Failure”): There is an active fault, which prevents the reset request from executing First check: Clear the source of the fault (usually en external E-Stop) and press FAULT RESET.

Updated 2026-09-17 · LogrobotLM reference

Description

There is an active fault, which prevents the reset request from executing

Remedy

Clear the source of the fault (usually en external E-Stop) and press FAULT RESET.

Related codes

APSH-012WARN REMOTE switch must be on LOCALAPSH-013WARN Place robot into REMOTE stateAPSH-015WARN Step mode must be disabledAPSH-016WARN Robot is not under PLC control

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →