LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm CVIS-197 — This tool was not found

FANUC CVIS-197 (“This tool was not found”): The vision tool with the specified name does not exist. First check: Check if the specified vision tool exists, and select the correct name.

Updated 2026-08-29 · LogrobotLM reference

Description

The vision tool with the specified name does not exist.

Remedy · Remède

Check if the specified vision tool exists, and select the correct name.

Frequently asked · Questions fréquentes

What does FANUC alarm CVIS-197 mean?
FANUC CVIS-197 (“This tool was not found”): The vision tool with the specified name does not exist.
How do you troubleshoot FANUC alarm CVIS-197?
Check if the specified vision tool exists, and select the correct name.

Related codes / Codes liés

CVIS-195The sorting parameters are now invalid.¥n They have been reset to the default values.CVIS-196Another setup page '%s' is already in live mode.¥n Exit live mode in the other setup page first.CVIS-198Layer threshold exceeded limitCVIS-199Layer output number is used elsewhere

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →