LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm MOTN-360 — Dest-Prev too close (L:…)

Manufacturer wording — Dest-Prev too close (L:%d^5)
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC MOTN-360 (“Dest-Prev too close (L:…)”): The destination and previous positions of this A motion are too close to each other. First check: Re-touch up either the taught point of the current A motion line or the taught point of the A motion line that is prior to the previous A motion line.

Updated 2026-09-17 · LogrobotLM reference

Description

The destination and previous positions of this A motion are too close to each other.

Remedy

Re-touch up either the taught point of the current A motion line or the taught point of the A motion line that is prior to the previous A motion line.

Related codes

MOTN-358Strt-Prev too close (L:…)MOTN-359Strt-Next too close (L:…)MOTN-361Dest-Next too close (L:…)MOTN-362Please disable arc blending

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →