LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PAIN-253 — WARN Beaker Timeout, Scale Cal Aborted

FANUC PAIN-253 (“WARN Beaker Timeout, Scale Cal Aborted”): Not enough time has been allowedto fully empty the canister, by the Beaker Fill Timeout. First check: N/A

Updated 2026-09-17 · LogrobotLM reference

Description

Not enough time has been allowedto fully empty the canister, by the Beaker Fill Timeout. The canister did not empty due to the trigger or regulator not opening. There has been a loss of canister position feedback.: Check the regulator and gun tobe sure they are functioning properly. Increase Beaker Fill Timeout from AccuStat setup screen. Fix the trigger or regulator. Verify canister position feedback (AIN[1, DISP]).

Remedy

N/A

Related codes

PAIN-251WARN Failed to find Upper limitPAIN-252WARN Failed to find Lower limitPAIN-254WARN Non-increasing cal tablePAIN-255WARN Calculated output > Max Output

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →