LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm PNT1-395 — %sRobot not at maintenance position

FANUC PNT1-395 (“%sRobot not at maintenance position”): Robot is not positioned at maintenance. First check: Robot must be at the maintenance position before a move to exit maintenance is executed.

Updated 2026-08-29 · LogrobotLM reference

Description

Robot is not positioned at maintenance.

Remedy · Remède

Robot must be at the maintenance position before a move to exit maintenance is executed.

Frequently asked · Questions fréquentes

What does FANUC alarm PNT1-395 mean?
FANUC PNT1-395 (“%sRobot not at maintenance position”): Robot is not positioned at maintenance.
How do you troubleshoot FANUC alarm PNT1-395?
Robot must be at the maintenance position before a move to exit maintenance is executed.

Related codes / Codes liés

PNT1-393%sEnter Maintenance program is undefinedPNT1-394%sExit Maintenance program is undefinedPNT1-400%sApplicator enable is OFFPNT1-401%sApplicator enable is ON

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →