LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm PNT1-400 — %sApplicator enable is OFF

FANUC PNT1-400 (“%sApplicator enable is OFF”): This message is displayed when the applicator valve enable input turns off. First check: None.

Updated 2026-08-29 · LogrobotLM reference

Description

This message is displayed when the applicator valve enable input turns off. When this input is off, the GUN trigger outputs are blocked from turning on.

Remedy · Remède

None.

Frequently asked · Questions fréquentes

What does FANUC alarm PNT1-400 mean?
FANUC PNT1-400 (“%sApplicator enable is OFF”): This message is displayed when the applicator valve enable input turns off. When this input is off, the GUN trigger outputs are blocked from turning on.
How do you troubleshoot FANUC alarm PNT1-400?
None.

Related codes / Codes liés

PNT1-394%sExit Maintenance program is undefinedPNT1-395%sRobot not at maintenance positionPNT1-401%sApplicator enable is ONPNT1-406%sApplicator enable is OFF

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →