LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm PNT1-708 — %sSpeed avg. error excessive

Description

Checks for how far the speed is from the set point have been too high. Possible causes are:

Remedy · Remède

Check and replace the I/P transducer if necessary. Check the supply and pilot air pressures. If either one is low, increase it. Possibly decrease the Max. error from setpoint parameter.

Related codes / Codes liés

PNT1-706%sTurbine under speed faultPNT1-707%sTurbine under speed warningPNT1-709%sBearing Air NOT OKPNT1-710%sCruise Speed not established

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique.