FANUC Alarm PNT1-710 — Cruise Speed not established

Manufacturer wording — %sCruise Speed not established
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PNT1-710 (“Cruise Speed not established”): The Cruise Speed determined during the Bell Speed Startup Test could not be established. First check: Redo the Bell Speed Startup Test to determine a new Cruise Speed, or check the turbine or regulator.

Updated 2026-09-17 · LogrobotLM reference

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →