LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PNT1-709 — Bearing Air NOT OK

Manufacturer wording — %sBearing Air NOT OK
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PNT1-709 (“Bearing Air NOT OK”): The digital input signal indicating the Bear Air is above the minimum pressure is not ON. First check: N/A

Updated 2026-09-17 · LogrobotLM reference

Description

The digital input signal indicating the Bear Air is above the minimum pressure is not ON. Check the supply pressure to the Bearing Air or verify the digital input signal is working correctly.

Remedy

N/A

Related codes

PNT1-707Turbine under speed warningPNT1-708Speed avg. error excessivePNT1-710Cruise Speed not establishedPNT1-716Turbine Startup Test Not Complete

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →