FANUC Alarm PNT2-100 — OVC alarm
FANUC PNT2-100 (“OVC alarm”): The average current calculated by the servo software exceeded the specification. First check: Refer to troubleshooting section in the Electrical Connection and Maintenance Manual.
Updated 2026-09-17 · LogrobotLM reference
Description
The average current calculated by the servo software exceeded the specification.
Remedy
Refer to troubleshooting section in the Electrical Connection and Maintenance Manual.
Related codes
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →