FANUC Alarm PNT2-105 — Unitialized position
FANUC PNT2-105 (“Unitialized position”): This is a system software error. First check: Document the events that led to the error, record the software version number and contact your local distributor or the FANUC or FANUC Robotics technical representative.
Updated 2026-08-29 · LogrobotLM reference
Description
This is a system software error.
Remedy · Remède
Document the events that led to the error, record the software version number and contact your local distributor or the FANUC or FANUC Robotics technical representative. You can try to clear the error by powering the controller off and then on.
Frequently asked · Questions fréquentes
- What does FANUC alarm PNT2-105 mean?
- FANUC PNT2-105 (“Unitialized position”): This is a system software error.
- How do you troubleshoot FANUC alarm PNT2-105?
- Document the events that led to the error, record the software version number and contact your local distributor or the FANUC or FANUC Robotics technical representative. You can try to clear the error by powering the controller off and then on.
Related codes / Codes liés
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →