LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm SEAL-043 — STOP High pressure

FANUC SEAL-043 (“STOP High pressure”): The pressure signal is above its upper limit for set time when the sealant is dispensed. First check: Check the pressure signal of the sealing equipment, disable to check the high pressure

Updated 2026-09-17 · LogrobotLM reference

Description

The pressure signal is above its upper limit for set time when the sealant is dispensed.

Remedy

Check the pressure signal of the sealing equipment, disable to check the high pressure

Related codes

SEAL-041STOP Seal not readySEAL-042ABORT Part ID mismatch detectedSEAL-044STOP Low pressure (E…)SEAL-045STOP High pressure (E…)

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →