LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm SVGN-230 — Manual weight setup err: Gun…,P…

Manufacturer wording — Manual weight setup err: Gun%d,P%d
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC SVGN-230 (“Manual weight setup err: Gun…,P…”): A mistake is found in the setting of the manual weight compensation. First check: Go to the Servo Gun General Setup screen, select Manual weight compen.

Updated 2026-09-17 · LogrobotLM reference

Description

A mistake is found in the setting of the manual weight compensation. Therefore, pressure was not able to be compensated.

Remedy

Go to the Servo Gun General Setup screen, select Manual weight compen. Confirm the setting of the manual weight compensation function.

Related codes

SVGN-221Incomp semi-auto wt comp setupSVGN-222UT correct ang is out of rangeSVGN-231Can't detect pressure postureSVGN-232This gun cannot use AUTO

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →