LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

KUKA Error 1534 — WRONG CHECKSUM OF CORRECTION DATA

Error

Displayed as KSS01534 on KRC4 / KRC5 controllers

KUKA 1534 (“WRONG CHECKSUM OF CORRECTION DATA”): The correction data have been modified. First check: Carry out referencing/adaptation.

Updated 2026-09-09 · LogrobotLM reference

Cause

The correction data have been modified.

Effect

Stop via braking ramp. All active commands are inhibited.

Troubleshooting

Carry out referencing/adaptation. Archive the correction data.

Related codes

1532THE CIRCLE WILL BE EXECUTED AS A LIN1536INCORRECT ARRAY PARAMETER1531NOT IN T1 MODE, CALIBRATION NOT POSSIBLE1537STOP DUE TO LOADING OF NEW USER DATA

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →