LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

KUKA Error KSS01362 — Mode selection chain

Info

KUKA KSS01362 (“Mode selection chain”): “STOP for exchange operation mode”: stop triggered during an operating mode change. Likely part: smartPAD (smartPAD teach pendant) +1 more.

Updated 2026-09-09 · LogrobotLM reference

Cause

“STOP for exchange operation mode”: stop triggered during an operating mode change. Harmless in isolation, but if it appears repeatedly together with KSS00364, it indicates a hardware problem in the mode selection chain (power supply, smartPAD, CIB).

Part to check / replace

KUKA KSS01362 points to the hardware below — start here before ordering.

Tap a part for every code that points to it — and verify the exact variant for your controller before ordering.

Related codes

KSS00126Servo drive (KSD/KSP) + mechanical drive train of the axisKSS00276Machine data vs hardware (RDC/EDS, disk)KSS00364Mode selector / 27 V power supply of the PC (KPC) / CIBKSS01146Motor / axis brake / servo drive

Same hardware involved

KSS15014CIBKSS15058CIBKSS15002smartPADKSS15101smartPAD

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →