LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm SVGN-148 — Can't identify routine name.

FANUC SVGN-148 (“Can't identify routine name.”): The routine name corresponding to the standalone instruction cannot be identified. First check: See remedy for cause error.

Updated 2026-09-17 · LogrobotLM reference

Description

The routine name corresponding to the standalone instruction cannot be identified. Refer to the cause code for the root cause.

Remedy

See remedy for cause error.

Related codes

SVGN-146Joint velocity limit too low.SVGN-147Sync/speed min distance =….SVGN-149CP enable is required.SVGN-150Synchronization enable is required.

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →