LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm SVGN-217 — Do press calib over again

FANUC SVGN-217 (“Do press calib over again”): There is mistake in the setting of weight compensation function at pressure calibration. First check: Confirm the weight compensation gun type of the Servo Gun General Setup screen Confirm the setting of tool coordinate system Execute pressure calibration again.

Updated 2026-09-17 · LogrobotLM reference

Description

There is mistake in the setting of weight compensation function at pressure calibration.

Remedy

Confirm the weight compensation gun type of the Servo Gun General Setup screen Confirm the setting of tool coordinate system Execute pressure calibration again.

Related codes

SVGN-215Incomp manual wt comp setupSVGN-216Illegal wt compens val: Gun…,P…SVGN-218This press can't be compensatedSVGN-219Angle is wrong

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →