FANUC Alarm SVGN-219 — Angle is wrong
FANUC SVGN-219 (“Angle is wrong”): A set value of the angle is wrong. First check: The interval between angle and angle at pressure calibration should be away by 70 degrees or more.
Updated 2026-08-29 · LogrobotLM reference
Description
A set value of the angle is wrong.
Remedy · Remède
The interval between angle and angle at pressure calibration should be away by 70 degrees or more. Confirm the set value of the angle.
Frequently asked · Questions fréquentes
- What does FANUC alarm SVGN-219 mean?
- FANUC SVGN-219 (“Angle is wrong”): A set value of the angle is wrong.
- How do you troubleshoot FANUC alarm SVGN-219?
- The interval between angle and angle at pressure calibration should be away by 70 degrees or more. Confirm the set value of the angle.
Related codes / Codes liés
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →